The windows installation of air conditioners can be difficult to install. Heavy applications never perfectly fit into the window opening, and in order to function well, the window must be sealed against the outside air heating. When ac installation phoenix in a sliding window, all problems are rotated 90 degrees, which can make installation difficult to complete.
Brackets for air conditioners
The first you need to install is a device for supporting the weight of air conditioning. The applet hangs heavy outside the window, and it will not balance well. Since a sliding window has a metal frame or vinyl along the bottom of the window opening, owners must use a metal support bracket. The bracket screws under the window, raise the air conditioning unit above the frame and securely holds the unit from the front to the rear.
Seal around the air conditioner
Once the air conditioner is installed in the window, the rest of the window should be sealed against the hot, humid air outside. Applies 2 inches (5 centimeters) foam tape square around the perimeter of the air conditioner to seal the bottom and sides. Then slide the window to the unit to close the horizontal space. Then just top of the window to close .
Enclosing the window
Typical window air conditioners are folded sliding panels along the sides, as they are designed to be installed on double hung windows which are closed against the top of the unit, leaving only a small gap on both sides to seal . In a sliding window is open space above the unit and you have two options. Some appliance stores are folding panels, waterproof expandable. Find one of these panels, which is of the same height as a width of the air conditioner, turn it on its side, position it over the air conditioner and screw it in place on the top of the window frame. Alternatively, cut a piece of plywood to the open space and the screw in place. While this second option is less aesthetically pleasing, is likely to create a better seal.
Portable Air conditioners
If you’re in the market for air conditioners and you have not made your purchase, consider a ground unit, portable unit. These devices are supported on the ground and are about the size of a small car microwave. The unit has a sliding panel in the window, attached to the air conditioning unit with two white hoses. It is much easier to seal the panel in the window for the hot summer months to assemble the complete air conditioner in the window opening. If the panel does not have the right size, a fine piece of plywood or cardboard combined with tape around the perimeter seal easily in the opening panel of the window.