For many people in dry climates or in cities where water use is restricted, it is difficult or downright impossible to grow grass. For others, the lack of green thumb or the time to devote to it stand in the possibility of having a lush garden. For these people, the installation of synthetic turf in the concrete may be the best option. Artificial turf installation Phoenix AZ has do be done by a professional to get the best results. When installing artificial grass you need to prepare the right base for a great quality.
1. Measures the amount of space you want to cover, to make sure you are buying the amount of grass you need, but buy a little more, and you better have plenty to be very little. Assume that you will need at least 6 inches (15 cm) of grass at each corner to have enough space to cut a straight line.
2. Barre concrete before installing the program. If you let dirt, leaves, grass or concrete and place it in the artificial grass will affect their appearance.
3. Place your synthetic turf on the site. Use scissors or a knife to cut the edges, based on your particular area. Always short artificial turf so that is even with the edge you want to cover. Leave grass placed between 2 and 3 hours for wrinkles or imperfections disappear.
4. Prepare your exterior tape or glue according to manufacturer’s instructions. The tape and gum are available in all stores for the home and garden. Turning the edges of artificial grass and secures the tape along the bottom edge, or a layer of glue placed there. Make sure your tape or glue go to the edge of the grass, to prevent rising. Pressing the bottom of the engraving or glued back to physical and pressed downwardly along the edge to remove any bubbles or wrinkles. If you used glue, let it sit for several hours to dry.